FPV Super Pursuit FG, 6 Speed, 6/08-9/10 Mantic Stage Performance Clutch Kit

NZ AUTOMOTIVE DISTRIBUTORS LTD - NZAD
_____________________________________
NZ's Favourite online Outlet for Automotive parts including Clutches, Flywheels, Brakes, Water Pumps, Bearings, 4WD Accessories, parts and more.

PLEASE NOTE
STOCK COMES FROM A WAREHOUSE THAT SUPPLIES THE WHOLE COUNTRY SO IS CONSTANTLY CHANGING.TO AVOID DISAPPOINTMENT PLEASE CHECK STOCK FIRST.

This auction is for a MS3-2252-CX FPV Super Pursuit FG, 6 Speed, 6/08-9/10 Mantic Stage Performance Clutch Kit

Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Stage 3 replacement clutch kit offers a strong torque capacity increase. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 70 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle. MANTIC STAGE SERIES COVER ASSEMBLY: Performance Clutch Systems for street use require increased torque capacity while retaining good pedal feel with fine modulation control. These characteristics inevitably increase heat which reduces service life. So the ideal performance clutch system for the street must also have improved heat dissipation. Mantic Stage 3 clutch kits feature a 20% increase (over original equipment) in clamp load for increased torque capacity. SPHEROIDAL GRAPHITE CASTINGS: Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. BALANCED COVERS: To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process. CERAMETALLIC FRICTION MATERIAL CLUTCH PLATE: The Torque Capacity of a Clutch Plate can be increased by using exotic cerametallic friction material featuring a higher coefficient of friction. However, cerametallic material reduces pedal feel and results in more sudden clutch engagement, reducing street driveability. Mantic Stage 3 Clutch Kits feature cerametallic friction material on both sides of the clutch plate. This results in a strong torque capacity increase compared with Stage 2 - but reduced street driveability. Stage 3 kits include cushioned segments and a sprung hub to maintain a reasonable level of street drivability.
This kit includes : MANTIC Heavy Duty Cover Assembly, Full Cerametallic (SSCC) Clutch Plate For Increased Torque capacity featuring High Performance Engineered and Manufactured Friction Material, Concentric Slave Cylinder, Clutch Alignment Tool, Spigot
Mantic Heavy Duty SGI Cover Assembly
Full Cerametallic Clutch Plate
1 Year / 20,000KM Warranty

VEHICLE FITMENT:
Ford Falcon 5.4 Ltr, 220kw BF, 6 Speed, 10/05-4/08
Ford Falcon 5.4 Ltr, 260kw BA XR8, 5 Speed, 10/03-9/05
Ford Falcon 5.4 Ltr, 220kw BA, 5 Speed, 10/03-9/05
Ford Falcon 5.4 Ltr, 260kw BF XR8, 6 Speed, 10/05-4/08
FPV GT-P 5.4 Ltr, 315kw FG, 6 Speed, 6/08-9/10
FPV GT-E 5.4 Ltr, 315kw FG, 6 Speed, 6/08-9/10
FPV Super Pursuit 5.4 Ltr, 315kw FG, 6 Speed, 6/08-9/10
FPV Pursuit 5.4 Ltr, 315kw FG, 6 Speed, 7/14-10/14
FPV Pursuit 5.4 Ltr, 315kw FG, 6 Speed, 6/08-9/10
FPV GT 5.4 Ltr, 315kw FG, 6 Speed, 6/08-9/10
FPV GS 5.4 Ltr, 302kw FG, 6 Speed, 9/09-9/10
FPV GT-P 5.4 Ltr, Boss 290, 260kw BA Mk I, 5 Speed, 10/03-12/04
FPV GT 5.4 Ltr, Boss 290, 260kw BA Mk I, 5 Speed, 10/03-12/04
FPV GT-P 5.4 Ltr, Boss 290, 260kw BA Mk II, 6 Speed, 1/04-12/05
FPV GT 5.4 Ltr, Boss 290, 260kw BA Mk II, 6 Speed, 1/04-12/05
FPV Pursuit 5.4 Ltr, Boss 290, 260kw BA Mk I, 5 Speed, 10/03-12/04
FPV Super Pursuit 5.4 Ltr, Boss 290, 260kw BA Mk II, 6 Speed, 1/04-12/05
FPV Pursuit 5.4 Ltr, Boss 290, 260kw BA Mk II, 6 Speed, 1/04-12/05