Subaru Brumby AM5A, 7/79-5/84, Push Rod Eng PHC Heavy Duty Clutch Kit

NZ AUTOMOTIVE DISTRIBUTORS LTD - NZAD
_____________________________________
NZ's Favourite online Outlet for Automotive parts including Clutches, Flywheels, Brakes, Water Pumps, Bearings, 4WD Accessories, parts and more.

PLEASE NOTE
STOCK COMES FROM A WAREHOUSE THAT SUPPLIES THE WHOLE COUNTRY SO IS CONSTANTLY CHANGING.TO AVOID DISAPPOINTMENT PLEASE CHECK STOCK FIRST.

This auction is for a V242NHD Subaru Brumby AM5A, 7/79-5/84, Push Rod Eng PHC Heavy Duty Clutch Kit

Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Heavy Duty Clutch Kit Suits OE Flywheel
Typical 20% Increase in Torque Capacity
1 Year / 20,000KM Warranty

VEHICLE FITMENT:
Subaru 1600 - 1800 4WD Leone & L Series 1.8 Ltr, EA81 AB5A, 7/79-5/84, Push Rod Eng
Subaru 1600 - 1800 4WD Leone & L Series 1.8 Ltr, EA81 AB5, 7/79-5/84, Push Rod Eng
Subaru 1600 - 1800 4WD Leone & L Series 1.8 Ltr, EA81 AF5A, 7/79-5/84, Push Rod Eng
Subaru 1600 - 1800 4WD Leone & L Series 1.8 Ltr, EA81 AF5, 7/79-5/84, Push Rod Eng
Subaru 1600 - 1800 2WD Leone & Brumby 1.8 Ltr OHC, EA82 AA4, 6/84-12/87
Subaru 1600 - 1800 2WD Leone & Brumby 1.6 Ltr, EA71 AA2, 6/84-12/87
Subaru 1600 - 1800 2WD Leone & Brumby 1.8 Ltr, EA81 AB4, 5/79-5/84, Push Rod Eng
Subaru 1600 - 1800 2WD Leone & Brumby 1.6 Ltr, EA71 AP2, 6/84-12/87
Subaru 1600 - 1800 2WD Leone & Brumby 1.8 Ltr OHC, EA82 AL4, 6/84-12/87
Subaru 1600 - 1800 2WD Leone & Brumby 1.8 Ltr OHC, EA82 AG4, 6/84-12/87
Subaru 1600 - 1800 2WD Leone & Brumby 1.8 Ltr, EA81 AM4, 5/79-5/84, Push Rod Eng
Subaru Brumby 1.8 Ltr, EA81 AM5A, 7/79-5/84, Push Rod Eng
Subaru 1600 - 1800 4WD Leone & L Series 1.8 Ltr, EA81 AM5A, 7/79-5/84, Push Rod Eng
Subaru Brumby 1.8 Ltr, EA81 AJ5, 7/79-5/84, Push Rod Eng
Subaru Brumby 1.8 Ltr, EA81 AF5A, 7/79-5/84, Push Rod Eng
Subaru 1600 - 1800 4WD Leone & L Series 1.8 Ltr, EA81 AJ5, 7/79-5/84, Push Rod Eng
Subaru Brumby 1.8 Ltr, EA81 AB5A, 7/79-5/84, Push Rod Eng
Subaru Vortex 1.8 Ltr EFI AX4, 1/85-12/88