PHC Heavy Duty | SKU:
V1452NHD VOLV_S40V
Volvo S40-V40 Gdi, 3/98-3/04 PHC Heavy Duty Clutch Kit
$299.00
Unit price
/
Unavailable
Tax included
Shipping calculated at checkout.
Couldn't load pickup availability
NZ AUTOMOTIVE DISTRIBUTORS LTD - NZAD
_____________________________________
NZ's Favourite online Outlet for Automotive parts including Clutches, Flywheels, Brakes, Water Pumps, Bearings, 4WD Accessories, parts and more.
PLEASE NOTE
STOCK COMES FROM A WAREHOUSE THAT SUPPLIES THE WHOLE COUNTRY SO IS CONSTANTLY CHANGING.TO AVOID DISAPPOINTMENT PLEASE CHECK STOCK FIRST.
This auction is for a V1452NHD Volvo S40-V40 Gdi, 3/98-3/04 PHC Heavy Duty Clutch Kit
Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.
This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing
Heavy Duty Clutch Kit Suits OE Flywheel
Typical 20% Increase in Torque Capacity
1 Year / 20,000KM Warranty
VEHICLE FITMENT:
Hyundai Lantra 1.8 Ltr, G4CN 10/92-8/95
Hyundai S Coupe 1.5 Ltr Turbo, G4EK 10/92-5/96
Hyundai Sonata 2.0 Ltr Y2, 1/94-11/01
Hyundai Sonata 2.0 Ltr, G63B Y1, 1/89-4/93
Mitsubishi Cordia 1.8 Ltr Turbo AA, 4/83-11/84
Mitsubishi Cordia 1.8 Ltr Turbo AB, 11/84-12/85
Mitsubishi Cordia 1.8 Ltr Turbo AC, 1/86-7/89
Mitsubishi Chariot 2.0 Ltr, 4G63 N33W, 5/91-4/92, New Zealand Model
Mitsubishi Chariot 1.8 Ltr, 4G93 N12W, 1/91-12/95
Mitsubishi Chariot 2.0 Ltr Non Turbo, 4G63 N43W, 5/91-9/97, New Zealand Model
Mitsubishi Galant 2.0 Ltr, 4G63 HG, 5/89-8/90
Mitsubishi Galant 2.0 Ltr, 4G63A HJ, 4/93-5/96
Mitsubishi Galant 2.0 Ltr 16V EFI, 4G63 HH (GSR), 9/90-3/93
Mitsubishi Galant 2.0 Ltr, 4G63 HH, 9/90-3/93
Mitsubishi Galant 2.0 Ltr 16V EFI, 4G63 HG (GSR), 5/89-8/90
Mitsubishi Galant 1.8 Ltr V6, 6A11, 100kw E53A, 5/92-9/94, New Zealand Only
Mitsubishi Galant 1.8 Ltr, 4G93, 111KW 8/96-4/00, New Zealand Only
Mitsubishi Legnum 1.8 Ltr, 4G93, 111kw EC1W, 12/96-4/00, New Zealand Model
Mitsubishi Legnum 1.8 Ltr, 4G93, 111KW 8/95-4/00, New Zealand Only
Mitsubishi Magna 2.6 Ltr, 4G54 TM, 4/85-5/87
Mitsubishi Libero 1.8 Ltr Non Turbo, 4G93, 89kw CD5W, 5/92-3/00, New Zealand Model
Mitsubishi Libero 1.8 Ltr Non Turbo, 4G93, 89kw CB5W, 5/92-3/00, New Zealand Model
Mitsubishi Lancer 2.0 Ltr SOHC, 4G94, 92kw CH , 5 Speed, 10/03-8/05
Mitsubishi Lancer 1.8 Ltr EFI, 4G93 CC, 9/92-3/95
Mitsubishi Nimbus 2.0 Ltr, 4G63 UC, 9/87-1/92
Mitsubishi RVR 1.8 Ltr, 4G93 N11W, 1/91-12/97
Mitsubishi RVR 1.8 Ltr, 4G93 N21W, 1/91-12/97
Proton 1.8 Ltr 16V MPFI, 4G93 Coupe, M21, 10/97-9/98
Proton Satria 1.8 Ltr, 4G93, 103kw GTi, 8/99-12/05
Volvo S40-V40 1.8 Ltr 16V, B4184SM, 92kw Gdi, 3/98-3/04
Volvo S40-V40 1.8 Ltr 16V, B4184SJ, 90kw Gdi, 6/01-3/04
_____________________________________
NZ's Favourite online Outlet for Automotive parts including Clutches, Flywheels, Brakes, Water Pumps, Bearings, 4WD Accessories, parts and more.
PLEASE NOTE
STOCK COMES FROM A WAREHOUSE THAT SUPPLIES THE WHOLE COUNTRY SO IS CONSTANTLY CHANGING.TO AVOID DISAPPOINTMENT PLEASE CHECK STOCK FIRST.
This auction is for a V1452NHD Volvo S40-V40 Gdi, 3/98-3/04 PHC Heavy Duty Clutch Kit
Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.
This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing
Heavy Duty Clutch Kit Suits OE Flywheel
Typical 20% Increase in Torque Capacity
1 Year / 20,000KM Warranty
VEHICLE FITMENT:
Hyundai Lantra 1.8 Ltr, G4CN 10/92-8/95
Hyundai S Coupe 1.5 Ltr Turbo, G4EK 10/92-5/96
Hyundai Sonata 2.0 Ltr Y2, 1/94-11/01
Hyundai Sonata 2.0 Ltr, G63B Y1, 1/89-4/93
Mitsubishi Cordia 1.8 Ltr Turbo AA, 4/83-11/84
Mitsubishi Cordia 1.8 Ltr Turbo AB, 11/84-12/85
Mitsubishi Cordia 1.8 Ltr Turbo AC, 1/86-7/89
Mitsubishi Chariot 2.0 Ltr, 4G63 N33W, 5/91-4/92, New Zealand Model
Mitsubishi Chariot 1.8 Ltr, 4G93 N12W, 1/91-12/95
Mitsubishi Chariot 2.0 Ltr Non Turbo, 4G63 N43W, 5/91-9/97, New Zealand Model
Mitsubishi Galant 2.0 Ltr, 4G63 HG, 5/89-8/90
Mitsubishi Galant 2.0 Ltr, 4G63A HJ, 4/93-5/96
Mitsubishi Galant 2.0 Ltr 16V EFI, 4G63 HH (GSR), 9/90-3/93
Mitsubishi Galant 2.0 Ltr, 4G63 HH, 9/90-3/93
Mitsubishi Galant 2.0 Ltr 16V EFI, 4G63 HG (GSR), 5/89-8/90
Mitsubishi Galant 1.8 Ltr V6, 6A11, 100kw E53A, 5/92-9/94, New Zealand Only
Mitsubishi Galant 1.8 Ltr, 4G93, 111KW 8/96-4/00, New Zealand Only
Mitsubishi Legnum 1.8 Ltr, 4G93, 111kw EC1W, 12/96-4/00, New Zealand Model
Mitsubishi Legnum 1.8 Ltr, 4G93, 111KW 8/95-4/00, New Zealand Only
Mitsubishi Magna 2.6 Ltr, 4G54 TM, 4/85-5/87
Mitsubishi Libero 1.8 Ltr Non Turbo, 4G93, 89kw CD5W, 5/92-3/00, New Zealand Model
Mitsubishi Libero 1.8 Ltr Non Turbo, 4G93, 89kw CB5W, 5/92-3/00, New Zealand Model
Mitsubishi Lancer 2.0 Ltr SOHC, 4G94, 92kw CH , 5 Speed, 10/03-8/05
Mitsubishi Lancer 1.8 Ltr EFI, 4G93 CC, 9/92-3/95
Mitsubishi Nimbus 2.0 Ltr, 4G63 UC, 9/87-1/92
Mitsubishi RVR 1.8 Ltr, 4G93 N11W, 1/91-12/97
Mitsubishi RVR 1.8 Ltr, 4G93 N21W, 1/91-12/97
Proton 1.8 Ltr 16V MPFI, 4G93 Coupe, M21, 10/97-9/98
Proton Satria 1.8 Ltr, 4G93, 103kw GTi, 8/99-12/05
Volvo S40-V40 1.8 Ltr 16V, B4184SM, 92kw Gdi, 3/98-3/04
Volvo S40-V40 1.8 Ltr 16V, B4184SJ, 90kw Gdi, 6/01-3/04
Safe & Secure NZ Payment
Payment methods
Your payment information is processed securely by Windcave. We do not store credit card details nor have access to your credit card information.
We also accept Bank Transfer